 |
| Cationic Softner |
01. Instant Dissolving Weak Cationic
Fluffy Softener Flakes For Laundry For Towels, Socks
Chemical Composition:
Fatty Acid Amide Compound
Technical
Specification
Appearance: Milky white flakes,
PH value:3 to 4(5 to 10% solution),
Instant Dissolving Weak Cationic Fluffy
Softener Flakes.
Ionicity: weak cationic
Dissolving
Method:
Cold water: Add the flakes in water(30℃)gradually
in the proportion of 5-10%, stir them for 3-5 mins, then leave them aside
for 1-2 hours, stir them again gradually to get an even paste.
Warm water: Add the flakes in water (room
temperature) gradually in the proportion of 5-10%, stir them for 3-5 mins, heat up to 50-60℃ and stir them for 30-60 mins again
until the flakes become an even paste, then cool it down.
Properties:
Impart upright
pile and fluey property to fabric with low yellowing
Impart good
soft and elastic hand feel
Field
of Application:
Suitable for Yao
Li fluff fabric, also applied to towels, socks, common used in laundry
Application:
Padding: Dosage: 20 to 30 g/L (10% solution), Temperature: 30 to 40 ℃
Process:
one dip and one pad or two dips and two pads
Dipping: Dosage :3 to 8% (o.w.f) (10% solution) Liquor ratio:1:10 to 15 ,
Temperature: 40 to 50℃, Time: 30min
02. AEEA Free Softeners, Textile Softener
Flakes AF-1 For Hemp, Silk, Chemical Fiber
Chemical
Composition:
Fatty acid amide compound
Technical
Specification:
Appearance : pale yellow flakes
PH value : 3-5(5-10% solution)
Ionicity : weak cationic
Dissolving
Method:
Cold water: Add the flakes in water(30℃)gradually in the proportion of 5-10%, stir them
for 3-5 mins,
then leave them over night, stir them again gradually to get an even paste.
Warm water:Add the flakes in water (room
temperature) gradually in the proportion of 5-10%,
stir them for
3-5 mins, heat up to 65-70℃ and stir them for 30-60 mins again
until the flakes become an even paste, then cool it down.
Properties:
Impart very
soft, fluffy and full handle to fabric, low yellowing Lower viscosity if
dissolved in hot water, suitable for dyeing and printing house. Higher
viscosity if dissolved in cold water, suitable for laundry. Meet the Oeko-tex Standard
100 (2011 version), also in line with the EU "REACH" regulations that
promulgated by 73 "Substances of Very High Concern" (SVHC)
requirements, and also it is AEEA free
Field of
Application:
Suitable for
the finishing treatment of cotton, hemp, silk, chemical fiber, yarn and blended
fabric, and also for denim and a variety of clothing
Application:
Padding: Dosage: 20-30 g/L (10%
solution) Temperature:
30-40ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage:3-8% (o.w.f)(10%
solution) Liquor ratio:1:10-15
Temperature: 40-50
ْC
Time: 30min
3. Cationic Super Soft Instant Dissolving
Softener Flakes RT For Cotton, T/C, Synthetic
Chemical
Composition:
Imidazoline fatty acid
compound
Technical
Specification
Appearance:
pale yellow flakes
PH value: 4.5-6.5(5-10% solution)
Ionicity: cationic
Dissolving Method
Cold water: Add the flakes in water(30 ْC)gradually
in the proportion of 5-10%, stir them for 3-5 mins, then leave them aside
for 1-2 hours, stir them again gradually to get an even paste. Warm
Warm Water: Add the flakes in water (room
temperature) gradually in the proportion of 5-10%, stir them for 3-5 mins, heat
up to 50-60
ْC and stir them for 30-60 mins again until the flakes become an even
paste, then cool it down.
Properties
Impart very soft and smooth handle to cotton and synthetic fiber
Lower foaming and excellent antistatic properties
Field of Application
For all kinds of fibers, especially for
cotton, T/C, and synthetic fiber
Application
Padding: Dosage: 20-30 g/L (10%
solution) Temperature:
30-40ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8% (o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50ْC
Time: 30min
4. Pale Yellow Acrylic /
Synthetic Fiber Cationic Softener Flakes High Performance TC
Chemical
Composition
Fatty acid amine epoxide
compound
Technical
Specification
Appearance:
pale yellow flakes
PH value: 4.5-6.5 (5-10% solution)
Ionicity: cationic
Dissolving
Method
Add the flakes
in water(room temperature)gradually n the proportion of 5-10%, stir them and
heat up to 75-80ْC and stir them for 30-60 mins
again until the flakes become an even paste, then cool it down.
Properties
Impart good soft and full handle to fabric
Impart good soft and elastic properties
Field of
Application
Specialize in
acrylic and synthetic fiber with very good softness and smoothness
Application
Padding: Dosage: 20-30g/L(10%
solution) Temperature:
30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8%(o.w.f)(10%
solution) Liquor
ratio: 1:10-15
Temperature: 40-50
ْC
Time: 30min
5. High Molecular Polymer Multifunctional
Instant Dissolving Softener Flakes GRS
Chemical
Composition
Special high molecular
polymer
Technical
Specification
Appearance: pale yellow flakes
PH value: 4.-6.(5-10% solution)
Ionicity: cationic
Dissolving
Method
Cold
water: Add the flakes in water(30ْC)gradually
in the proportion of 5-10%, stir them
for 3-5 mins,
then leave them aside for 1-2 hours, stir them again gradually to get an even
paste.
Warm water:Add
the flakes in water (room temperature) gradually in the proportion of 5-10%,
stir them for 3-5 mins, heat up to 50-60 ْC and stir them for 30-60 mins again
until the flakes become an even paste, then cool it down.
Properties
Impart smooth,
soft, elastic and exquisite handle to fabric. Good elastic resilience, pinhole
recovery, delicate handle by formulated with silicone
Field of
Application
For all kinds
of fibers, especially for cotton, T/C, and synthetic fiber
Application
Padding: Dosage:20-30g/L (10%
solution) Temperature:
30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8%(o.w.f) (10%
solution) Liquor
ratio: 1:10-15
Temperature: 40-50
ْC
Time: 30min
6. Fibres Fabric Weak Cationic Softeners,
Dyeing House General Softener Flakes 4D/WR
Chemical
Composition
Fatty acid amine compound
Technical
Specification
Appearance:
pale yellow flakes
PH value: 4~6(5-10% solution)
Ionicity: weak cationic
Dissolving
Method
Temperature
raising : Add the flakes in water(room temperature )gradually in the proportion
of 5-10%, stir them and hert up to ( 65~75 ْC ) and stir them for 30-60
mins again until the flakes become even paste, then cool it down.
High
temperature :Add the flakes in water ( 65~75 ْC) gradually in the proportion
of 5-10%, stir them for 30-60 mins again until the flakes become even paste, then
cool it down.
Properties
Impart very
soft, Smooth and full handle to fabric
Lower
yellowing, low foaming and easily defoamed
Field of
Application
For all kinds
of fibres and fabric, especially for dyeing house
Application
Padding: Dosage: 20-30g/L(10%
solution) Temperature:
30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8% (o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50ْC
Time: 30min
7. Weak Cationic Laundry
Softeners, Milky White Softener Flakes For Denim / Sweater Washing.
Chemical Composition
Fatty
acid amide compound
Technical Specification
Appearance: milky white flakes
PH value: 3-4(5-10% solution)
Ionicity: weak cationic
Dissolving Method
Cold water: Add the flakes in water(30 ْC)gradually in
the proportion of 5-10%, stir them
for 3-5 mins, then leave them aside for 1-2 hours, stir them
again gradually to get an even paste.
Warm water:Add the flakes in water (room temperature) gradually
in the proportion of 5-10%, stir them for 3-5 mins, heat up to 50-60 ْC and
stir them for 30-60 mins again until the flakes become an even paste, then cool
it down.
Properties:
Impart very soft handle to fabric
Impart smooth and full handle to fabric
Low yellowing
Field of Application
For cotton fabric, especially for denim and sweater
washing
Application
Padding: Dosage: 20-30g/L (10% solution)
Temperature: 30-40ْC
Process: one dip and one pad or two dips and two pads
Dipping : Dosage : 3-8%(o.w.f) (10% solution)
Liquor ratio : 1 : 10-15
Temperature : 40-50
ْC
Time : 30min
8. Weak Cationic All-powerful
Softener Flakes For Fibres, Fabric
DR/SSK
Chemical
Composition
Fatty acid amine derivatives
Technical Specification
Appearance: pale yellow flakes
PH value: 4 ~ 6 (5-10% solution)
Ionicity : weak cationic
Dissolving Method
Temperature
raising : Add the flakes in water(room temperature )gradually in the proportion
of 5-10%, stir them and hert up to ( 65~75 ْC) and stir them for 30-60
mins again until the flakes
Become an even
paste, then cool it down.
High
temperature :Add the flakes in water ( 65~75 ْC) gradually in the proportion
of 5-10%,
stir them for
30-60 mins again until the flakes become an even paste, then cool it down.
Properties
Impart very
soft and fluffy handle to fabric
Impart smooth
handle to fabric with low yellowing and low foaming
Field
of Application
For all kinds
of fibres and fabric, especially for dyeing house
Application
Padding: Dosage: 20 -30g/L (10% solution)
Temperature: 30 -40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3 - 8% (o.w.f) (10%
solution) Liquor ratio: 1 : 10 -15
Temperature: 40 -50
ْC
Time: 30min
9. Instant Dissolving Cotton, Wool Fabric
Softener Flakes EA For Dyeing House and laundry
Chemical
Composition
Fatty acid amide compound
Technical Specification
Appearance:
pale yellow flakes
PH value: 3-5(5-10%
solution)
Ionicity: weak
cationic
Dissolving
Method
Cold
water: Add the flakes in water(30 ْC)gradually in the proportion of 5-10%, stir them
for 3-5 mins,
then leave them aside for 1-2 hours, stir them again gradually to get an even
paste.
Warm water:Add
the flakes in water (room temperature) gradually in the proportion of 5-10%,
stir them for
3-5 mins, heat up to 50-60 ْC and stir them for 30-60 mins again until the flakes
become an even paste, then cool it down.
Properties
Impart soft and
full handle to fabric with low yellowing
Impart soft and
elastic hand feel
Field of Application
For cotton,
T/C, wool fabrics, widely used in dyeing house and laundry
Application
Padding: Dosage: 20-30 g/L (10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8% (o.w.f) (10% solution)
Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
10. Weak Cationic Softener Flakes For
Washing Jeans, Fabric With Low Yellowing NT
Chemical
Composition
Organic fatty acid compound
Technical
Specification
Appearance: pale yellow flakes
PH value: 3-5 (5-10% solution)
Ionicity: weak cationic
Dissolving
Method
Cold
water: Add the flakes in water(30 ْC)gradually in the proportion of 5-10%, stir them
for 3-5 mins,
then leave them aside for 1-2 hours, stir them again gradually to get an even
paste.
Warm water: Add
the flakes in water (room temperature) gradually in the proportion of 5-10%,
stir them for
3-5 mins, heat up to 50-60 ْC and stir them for 30-60 mins again until the flakes
become an even paste, then cool it down.
Properties
Impart very
soft handle to fabric
Impart smooth
and full handle to fabric
Low yellowing
Field of Application
Applied to
softening finishing of cotton, synthetic fiber and blended fabric specially in
jeans and washing fabric
Application
Padding: Dosage: 20-30g/L(10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8%(o.w.f)(10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
11. Leveling Agent, Nonionic Hydrophilic
Softener Flakes For Fibres, Fabrics WEL
Chemical
Composition
High molecular polymer
Technical
Specification
Appearance: pale yellow flakes
PH value: 4.5~6.5 (5-10% solution)
Ionicity: nonionic
Dissolving Method
Temperature
raising : Add the flakes in water(room temperature )gradually in the proportion
of 5-10%, stir them and heat up to ( 65~75 ْC ) and stir them for 30-60
mins again until the flakes
become even
paste, then cool it down.
High
temperature :Add the flakes in water ( 65~75 ْC) gradually in the proportion
of 5-10%,
stir them for
30-60 mins again until the flakes become even paste, then cool it down.
Properties
Impart very
soft, Smooth and full handle to fabric
Good salt
resistance , alkali resistance and low yellowing, high hydrophilic property in
polyester
Can be used in
dyeing process and prevent crease defect because of knotted fabric in dyeing
As a leveling
agent, can be used in disperse dyes, reactive dyes (light colour ), acid dyes
(light colour )dyeing process with leveling , retarding dyeing and migration
dyeing properties ,no dull effect and no influence on fabric’s colour shade and
colour yied
Field of Application
For all kinds
of fibres and fabrics, also as a softener, leveling agent in dyeing process
Application
Padding: Dosage: 20-30g/L (10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8%(o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
12.AEEA free softener AF-2
Chemical
Composition
Fatty acid amide compound
Technical
Specification
Appearance:
pale yellow flakes
PH
value:3-5(5-10% solution)
Ionicity:cationic
Dissolving
Method
Add the flakes in water(30 ْC)gradually in the
proportion of 5-10%, stir them
for 3-5 mins,then heat up to
65-70 ْC and stir them for again until the flakes become an
even paste, then cool it down.
Properties
Impart very soft, fluffy and full
handle to fabric
Good salt and alkali resistance
Low foam
AEEA free
Meet the Oeko-tex Standard 100
(2011 version), also in line with the EU "REACH" regulations
that promulgated by 138
"Substances of Very High Concern" (SVHC) requirements
Field of
Application
Suitable for the finishing
treatment of cotton, hemp, silk, chemical fiber, yarn and blended fabric, and
also for denim and a variety of clothing, especially for printing and dyeing
factory
Application
Padding:Dosage:20-30g/L(10% solution)
Temperature:30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping:Dosage:3-8%(o.w.f)(10% solution) Liquor
ratio:1:10-15
Temperature:40-50 ْC
Time:30min
13.Pale Yellow All Powerful Cationic
Softener Pearl
For Shirts And Coats GWS
Chemical
Composition
Fatty acid amine derivative
compound
Technical
Specification
Appearance: pale yellow pearl
PH value: 4.-6.(5-10% solution)
Ionicity: cationic
Dissolving
Method
Add the pearl
in water ( room temperature ) gradually in the proportion of 5-10%, stir
them and heat up to 60~65 ْC and stir them for 30-60 mins again until the flakes
become an even paste, stir them until the paste cool down to prevent forming
film at the surface of solution. The temperature is not above 70 ْC, otherwise the emulsion is hard to even because of
viscosity.
Properties
Impart very
soft and full handle to fabric
Impart good
elastic and pinhole recovery Properties to fabric
Field
of Application
For all kinds
of fibers, especially for shirts and coats
Application
Padding: Dosage:20-30g/L (10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8% (o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
14. Pale Yellow Nonionic / Weak Cationic Hydrophilic
Softener Flakes For Leather Cloth
Chemical
Composition
Fatty acid and polyhydric
alcohol compound
Technical
Specification
Appearance: pale yellow flakes
PH value: 5 ~ 7 (5-10% solution)
Ionicity: nonionic / weak cationic
Dissolving
Method
Temperature raising : Add the flakes in water(room
temperature )gradually in the proportion of 5-10%, stir them and hert up
to ( 70~75 ْC
) and stir them for 30-60 mins again until the flakes
become even
paste, then cool it down.
High temperature :Add the flakes in water ( 70~75 ْC)
gradually in the proportion of 5-10%,
stir them for
30-60 mins again until the flakes become even paste, then cool it down.
Properties
Impart
excellent hydrophilic and antistatic property in polyester
Impart soft,
Smooth and full handle to fabric with low yellowing
Good salt
resistance , alkali resistance and anionic resistance
Field of Application
Suitable for
the fabrics that need high requirement of colour shade and whiteness,designed
for dyeing house
Applied to
antistatic finishing and help fluffing of printed cloth and leather cloth for
good hydrophilicty
Application
Padding: Dosage: 20-30 g/L (10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8% (o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
15.Super Soft Instant Dissolving Cationic
Softener Flakes For Synthetic Fiber
Chemical
Composition
Imidazoline fatty acid
compound
Technical Specification
Appearance: pale yellow flakes
PH value: 4.5-6.5(5-10% solution)
Ionicity: cationic
Dissolving Method
Cold water: Add the flakes in water(30 ْC)gradually
in the proportion of 5-10%, stir them
for 3-5 mins,
then leave them aside for 1-2 hours, stir them again gradually to get an even
paste.
Warm water: Add the flakes in water (room
temperature) gradually in the proportion of 5-10%,
stir them for
3-5 mins, heat up to 50-60 ْC and stir them for 30-60 mins again until the flakes
become an even paste, then cool it down.
Properties
Impart very
soft and smooth handle to cotton and synthetic fiber
Lower foaming
and excellent antistatic properties
Field of
Application
For all kinds
of fibers, especially for cotton, T/C, and synthetic fiber
Application
Padding: Dosage: 20-30g/L(10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8%(o.w.f)(10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
16. Multifunctional Instant Dissolving
Softener, Cationic Softeners Flakes GRS For Cotton, T/C
Chemical
Composition
Special high molecular
polymer
Technical Specification
Appearance: pale yellow flakes
PH value: 4.-6.(5-10% solution)
Ionicity: cationic
Dissolving
Method
Cold
water: Add the flakes in water(30 ْC)gradually in the proportion of 5-10%, stir them
for 3-5 mins,
then leave them aside for 1-2 hours, stir them again gradually to get an even
paste.
Warm water: Add
the flakes in water (room temperature) gradually in the proportion of 5-10%,
stir them for
3-5 mins, heat up to 50-60 ْC and stir them for 30-60 mins again until the flakes
become an even paste, then cool it down.
Properties
Impart smooth,
soft, elastic and exquisite handle to fabric
Good elastic
resilience, pinhole recovery, delicate handle by formulated with silicone
Field of Application
For all kinds
of fibers, especially for cotton, T/C, and synthetic fiber
Application
Padding: Dosage:20-30g/L(10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8% (o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
17. Acrylic / Synthetic Fiber Textile Softeners,
Cationic Softener Flakes High Performance
Chemical
Composition
Fatty acid amine epoxide
compound
Technical
Specification
Appearance: pale yellow flakes
PH value: 4.5 -6.5 (5-10% solution)
Ionicity: cationic
Dissolving
Method
Add the flakes
in water(room temperature)gradually n the proportion of 5-10%, stir them and
heat up to 75-80
ْC and stir them for 30-60 mins again until the flakes become an even
paste, then cool it down.
Properties
Impart good
soft and full handle to fabric
Impart good
soft and elastic properties
Field of
Application
Specialize in
acrylic and synthetic fiber with very good softness and smoothness
Application
Padding: Dosage:20-30g/L(10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage:3-8% (o.w.f) (10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
18. Low Viscosity Fibers Cationic Softener
Flakes, Dyeing House Softener RT-D/RT-L
Chemical Composition
Imidazoline fatty acid
compounds
Technical Specification
Appearance:
pale yellow flakes
PH value: 4.-6.(5-10% solution)
Ionicity: cationic
Dissolving
Method
Temperature
raising: Add the flakes in water (room temperature) gradually in the proportion
of 5—10%, stir and heat up to 70-75 ْC and stir for 30-60 mins again until the
flakes become and even paste, then cool it down.
High temperature:
Add the flakes in water (70-75 ْC) gradually in the proportion of 5-10%, stir for 30-60
mins again until the flakes become an even paste, then cool it down
Properties
Impart
excellent full, soft and smooth handle to fabric
Low foaming and
low viscosity designed for dyeing house
Field of
Application
For all kinds
of fibers, widely used in dyeing house
Application
Padding: Dosage: 20-30g/L(10%
solution) Temperature: 30-40 ْC
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 3-8%(o.w.f)(10%
solution) Liquor ratio: 1:10-15
Temperature: 40-50 ْC
Time: 30min
Storage and
Packing:
Shelf life: 12 months when store in cool, dry and shaded warehouse
Packing: 25kg plastic woven bag
